Le rogamos que copie e imprima aquí el manual operativo correspondiente en su idioma. Francais Copiez et imprimez ici la notice d’utilisation dans la langue. SERVICE MANUALScrew Compressor Model: SX 6 classic No.: 9__00USE Contents. KAESER SX6 COMPRESSOR MANUAL SMVLPIMPCZ | PDF | | 24 Aug, TABLE OF KAESER SX6 COMPRESSOR MANUAL.
|Published (Last):||18 April 2012|
|PDF File Size:||16.66 Mb|
|ePub File Size:||15.3 Mb|
|Price:||Free* [*Free Regsitration Required]|
Miscellaneous notices and symbols. Coupling defective or Vbelt broken. The machine has been running at least five minutes under LOAD. Use proper compressed air treatment. The life of the oil separator cartridge is influenced by: They feature excellent lubricity, outstanding demulsibility ability to separate from waterand long life.
Machine Air is drawn in from the surroundings and cleaned as it flows through sc6 filter 1. Oil change intervals speciality lubricants. Depressurize all pressurized components and enclosures.
Minimum pressure check valve does not open. Hazards from compressive forces Compressed air is a contained force. This applies particularly to parts contaminated with cooling oil. Check that the O ring is correctly seated and tighten the screws 1. Store and dispose of used materials and replaced parts in accordance with local environment protection regulations.
Since the venting line is closed, pressure in the oil separator tank will rise slowly to the relief valve blow off pressure. In the absence of any user specified alternatives, the limits given in these standards must be adhered to. Switch the machine off as soon as the direction of rotation is seen and compare it with the direction arrows on the kaeeser and airend.
Flow rate [cfm] kaeaer 0.
KAESER SX6 Service Manual
Change the cooling oil. Carry out a visual check of the machine. Lightly oil the new oil filter gasket.
System does not discharge at idle. Nut Air filter cartridge Housing Opening the air filter housing Unscrew the nut 1 on the housing 3. Lubrication of an air manuall is essential to reliable operation. The whole machine must be over the forks.
Turn the oil filter clockwise to tighten. Operation 3 ft radius from the machine Operating personnel 6 ft radius from the cooling air discharge.
KAESER SX6 Service Manual |
If necessary, the warmed cooling air should be treated to render it harmless. Tighten loose connections, repair or replace defective parts as necessary. Ensure that all amendments are entered in the manual. Observe approved safety regulations and national legislation applicable to all work carried out on the machine. Check the cartridge pressure differential and replace cartridge if necessary. Ambient temperature too low.
Slowly unscrew the oil drain plug 2 to allow oil to drain completely and residual air to escape. Safety relief valve blows off Possible cause: These conditions are detrimental to correct air treatment. The cooler could be damaged. Dispose of the old oil in accordance with local environment protection regulations. Overload protection relay settings. Check the oil and air coolers for leaks. Closing the air filter housing Clean all parts and sealing surfaces.
Manuals – Manuales – Notices d’utilisation – Bedienungsanleitungen
Leaks in plant system. The oil separator tank is vented. Switch off the compressor just before the end of the set 20 second period.
Checking cooling oil level. Never direct compressed air at persons or animals. Wrong oil is being used in the unit.
Clean the mats or replace if necessary. Start the machine and carry out a test run. The aftercooler brings down the compressed air temperature to 5 to 10 K above ambient. Open and clean connections. Contamination of food can result from using untreated compressed air for food processing. Air leak in unit. Installation work may only be carried out by authorised personnel! The red pin on the pressure scale indicates the manua.